Marvell Ethernet PHYs transceivers
Marvell continuously delivers the more advanced ethernet PHY transceivers products to the infrastructure market. Marvell’s transceivers are utilized for a wide array of enterprise, carrier, small medium business, industrial and cloud data center applications.
View all available marvell electronic parts in-stock, Click on the electronic part ID:
Fast & Gigabit Ethernet
Energy Efficient Ethernet (EEE) IEEE 802.3az for all supported data rates
Integrated Marvell Virtual Cable Tester® (VCT) technology
At least 170m reach at 1G
500m reach at 100M
MACSec - Allows data encryption for layer 2 security (MP)
1588v2 - Support 1 and 2 step PTP
SyncE - Synchronous Ethernet
88E3018 | Integrated 10/100 Fast Ethernet Transceiver - Additional MII Support |
88E1780 | 10/100/1000 BASE-T PHY, Octal Port, EEE, USGMII to Cu Transceiver |
88E1680 | 10/100/1000 BASE-T PHY, Octal Port, EEE, QSGMII to Cu Transceiver |
88E1548/48P | 10/100/1000 BASE-T PHY, Quad Port, PTPv2, SGMII/QSGMII to Cu/Fiber Transceiver |
88E1545 | 10/100/1000 BASE-T PHY, Octal Port, EEE, QSGMII to Cu Transceiver |
88E1512 | 10/100/1000 BASE-T PHY, Single Port, EEE, RGMII/SGMII to Cu/Fiber/SGMII Transceiver |
88E1510P/Q | 10/100/1000 BASE-T PHY, Low Latency, PTPv2, (RGMII/MII) |
88E1510/1518 | 10/100/1000 BASE-T PHY, Single Port, EEE, RGMII to Cu Transceiver |
Scalable mGig2.5G & mGig5G
Compliant with NBASE-T Alliance specifications for 2.5G and 5G modes
Superior EMI Mitigation - both Fast Retrain and Common Mode Sense implemented
Auto Media Detect - Allows one device to act as an Optical (SFI) or Base-T PHY
802.11ax and 802.11ac Wave 2 Access Point backhaul
10BASE-T legacy support
88E2580 | Octal-port, 5-speed PHY operating at 10M, 100M, 1000M, 2.5G, 5G data rates, MP-USXGMII/XFI to Cu Transceiver with PTP support |
88E2540 | A quad-port, 5-speed mGig5G, 10M/100M/1G/2.5G/5G PHY data rates over Cat5e cables |
AQR411C | An octal-port mGig5G, 10M/100M/1G/2.5G/5G PHY Ethernet Transceiver compatible with both IEEE 802.3bz standard and NBASE-T Alliance specification for 2.5 Gbps and 5 Gbps operation over Cat5e cables |
AQR411C | Quad-port, mGig5G, 10M/100M/1G/2.5G/5G PHY in a 14x12 mm package |
AQR412C | Quad-port, mGig2.5G, 10M/100M/1G/2.5G PHY in a 14x12 mm package |
AQR112C | Single-port, mGig2.5G, 10M/100M/1G/2.5G PHY in a 7x7 mm package |
AQR112 | Single-port, mGig2.5G, 10M/100M/1G/2.5G PHY in a 7x11 mm package |
AQR414C | Quad port, mGig5G, 10M/100M/1G/2.5G/5G PHY |
AQR415C | Quad port, mGig2.5G, 10M/100M/1G/2.5G PHY |
AQR814 | Octal port, mGig5G, 10M/100M/1G/2.5G/5G PHY |
AQR815 | Octal port, mGig2.5G, 10M/100M/1G/2.5G PHY |
88E2010/40L | A single-port, 5-speed mGig5G, 10M/100M/1G/2.5G/5G PHY data rates on UTP copper lines |
Scalable mGig10G
Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds
Advanced Cable Diagnostics with on-chip high-resolution cable analyzer
Energy-Efficient Ethernet (EEE)
Integrated MACsec (IEEE 802.1ae) with full support for AES-256 and stand-alone operation
88X3580 | Octal-port, 6-speed PHY operating at 10M, 100M, 1000M, 2.5G, 5G, 10G data rates, MP-USXGMII/XFI to Cu Transceiver with PTP support |
88X3540 | A quad-port, 6-speed mGig10G, 10M/100M/1G/2.5G/5G/10G PHY data rates, MP-USXGMII/XFI to Cu Transceiver |
AQR113 | Single Copper mGig10G, 10M/100M/1G/2.5G/5G/10G PHY with MACsec support |
AQR113C | Single Port Copper mGig10G, 10M/100M/1G/2.5G/5G/10G PHY with MACsec support |
AQR413C | Quad mGig10G, 10M/100M/1G/2.5G/5G/10G PHY |
AQR813 | Octal port, mGig10G, 10M/100M/1G/2.5G/5G/10G PHY |
88X3340P/3310P | 10 GbE, Quad_Single Port mGig10G, 10M/100M/1G/2.5G/5G/10G PHY, PTP, EEE, RXAUI/XFI/XGMII to Cu |
High Speed PHYs
Support for Ethernet speeds from 1G to 400G
25G NRZ and 56G, 112G PAM4 Long Reach Serdes that exceed IEEE specified performance requirements
Support for Gearboxing between NRZ and PAM4 modes of operation, with FEC termination and regeneration
256bit MACSec Encryption
Support IEEE 1588 v2 timestamping with accuracy exceeding Class C accuracy requirements
88X93160 | Dual 800GbE Retimer/Gearbox with 100G serial I/Os and passive DAC and Backplane drive capability |
88X9121P | Dual 400G MACsec PHY with 100G serial I/Os |
88X7121P | Dual 400G, Quad 200G, Octal 100G, 16 port 50G/25G/10G/1G Ethernet Transceiver with 256-bit MACsec Encryption and Class C PTP Timestamping |
88X7120 | Dual 400G Ethernet Retimer, Quad 200G, Octal 10G, 16 port 50G/25G PHY/Retimer |
88X5243P | Quad 100G, 16 port 25G/10G/1G Ethernet Transceiver with 256 bit MACSec Encryption and Class C PTP Timestamping |
88X5123 | Dual Port 100GbE/40GbE, Quad Port 50GbE, Octal Port 25GbE/10GbE/1GbE PHY/Retimer compliant to IEEE 802.3bj, IEEE 802.3by, IEEE 802.3ba and 25G Ethernet consortium specifications |
88X5121 | Dual 100 Gbps Ethernet Transceiver with integrated FEC for Copper Cable and Backplane Drive Capability |
88X5113 | Integrated 40GbE to 25GbE Gearbox, Quad 25G Ethernet Transceiver with Copper Cable and Backplane Drive Capability |
88X5111 | Integrated 100 Gbps Ethernet/MLG Gearbox with integrated FEC for Copper Cable and Backplane Drive Capability |